Carbon carbon belt options: what type of bar code with scraping resistance is the best? _ printing equipment

takeaway: carbon belt also calls the ribbon, roughly divided into three categories: wax base, mixing machine and resin matrix.

barcode carbon belt is barcode printers use consumables, is in one side coated wax, resin base or mixed ink a polyester film, coated on one side of the no ink lubricant to prevent the print head wear, barcode carbon belt in the bar code printer ink print head under the action of heat and pressure, the corresponding text and bar code information transferred to the label.

often encounter users will put forward some requirements, such as waterproof, prevent oil, alcohol, scratch resistant, etc. , what carbon belt.

the first print coated carbon belt mainly wax base, mixed base, then there is the distinction between imported and domestic, in print before you understand the elements of these two kinds of carbon and applications.

a, all the wax base carbon belt

1, the wax carbon belt with low cost, good printing effect, the characteristics of water will not spread out. Can print on the surface layer of printed materials; Suitable for high speed printing.

2. Not suitable for label printing tear not broken labels or wash water; Is printed out but it would be easy to be scraped off.

3, can be printed general copper price tag, clothing tag, label, carton label, wristband tag, certificate of approval, the product label.

2, mixed base carbon belt

1, tree and wax carbon belt is better than the wax carbon belt scrape abrasion resistance, but than the wear resistance of resin carbon with almost all the features. Can print into than all the wax carbon with a deep printed material. Printed on ripped to broken label effect is better.

2, is not suitable for printing on tearproof PET tags; Although can print clearly because tree and wax carbon belt still contain wax components can only be printed on the surface of label; So anti scraping effect didn't full resin carbon with good effect.

3, can be printed on surface of copper tag, clothing tag, usually copper, carton labels, wristband tag, shelf tags.

3, carbon belt printing effect test

mixed base carbon belt printing effect is best, especially the brand of carbon belt, scraping resistance should be: brand & gt; Domestic, mixed base & gt; Wax base.

after understanding the above several types of carbon belt, also need to know your machine is the use of carbon or carbon, in the print head is flat pressure or pressure type, big heart or a small volume.

1) Carbon is refers to ink in a belt shaft contact with carbon and carbon ink is no outside contact with the shaft. General bar code printer with two kinds of carbon, can be used only by the individual printers can be used at a fixed carbon and within or outside of carbon carbon belt.

2) Carbon belt from the use of printers print head can be divided into flat type carbon belt and side pressure type carbon belt, respectively for the printer and printer side pressure. Two kinds of carbon belt cannot be mixed use, otherwise it will affect the print effect.

3) Carbon coil heart is divided into 1 inch, 0. 5 inches, if the volume is wrong, is unable to mount the machine for printing.