| Xprinter

Latest products

TS-80

Protective Case for XP-P101

XP-TT425B Label Thermal Transfer Printer

Extension board for external paper holder

Product Information
Feedback

Product Overview

Product Specification

Service and Support

Product Overview

Xprinter-1

● Mini and lightweight	● The wireless distance is up to 10m
● Support charging treasure 5v, can charge anywhere	● 1000mAh battery-capacity

BROCHURES

DRIVER

Paper

Product Specification

Printing
Resolution	203 DPI
Printing method	Direct Thermal
Max.print speed	20mm/s
Max.print width	12mm
Max.roll diameter	50mm
Media type	Continuous, Gap
Media width	15mm
Max.roll diameter	50mm
Media thickness	80-150μm
Processor	32-bit CPU
Memory	128K Flash Memory / 16K RAM
Interface	USB+Bluetooth
Sensors	① Detection sensor ② Open cover sensor
Dimensions	100mm80mm35mm
Weight	160g
Cutter	Manual
Printer head life	50Km
Battery	3.7V / 1000mAh Continuous printing time: 1H; 14 roll of paper（6m, 84m） Charging time：2H
Charging input	DC 5V / 1A
System	Android / iOS
Operation environment	5 ~ 45°C（41~113°F）
Storage environment	-20 ~ 55°C（-40~140°F）

Service support

Q:What’s your main product line?

A:Specialized in Receipt printers, Label Printers, Mobile Printers, Panel printers, Kiosk printer, Dot Matrix Printer , Bluetooth printers.

Q:What is the Warranty for your printers?

A:We support 12 months for all of our products.

Q:What is printer defective rate?

A:Less than 0.3%

Q:If the goods are damaged, what can we do ?

A:1% FOC parts dispatched with shipment. When it is damaged, you can replace it directly.

Q:What's your delivery terms ?

A:Delivery terms can be EX-WORKS, FOB or C&F.

Q:What’s your leading time?

A:For less than 1000pcs, 7-10 working days.
For more than 1000pcs, 10-15 working days.

Q:What are your product command?

A:Thermal printer compatible with ESC\POS.
Label printer compatible with TSPL\ EPL\ DPL\ ZPL emulation.

Q:How do you control quality?

A:We are a company with ISO9001:2015 international QMS certification. Our products have obtained CCC, CE, FCC, RoHS, KC, SAA, BIS, BSMI certifications.

o******p

The production of Xprinter involves the following concepts: medical device regulations, design controls, medical device testing, risk management, quality assurance. It can withstand moist areas, which makes it particularly good for indoor and outdoor use

r******a

Xprinter is thoroughly tested to ensure that it must perform well in all weather conditions (snow, cold, wind) and withstand hundreds of pitch up and packing operations. This product will not become dirty and yellowing once it meets water

i******g

The inspections of Xprinter are conducted by a team of QC technicals. These checks include the various strengths of the sewing thread and the resilience and corrosion factors. With light maintenance, it will last a lifetime

o******w

During the development phase, the materials of Xprinter have been tested on its performance including bending test, tensile test, rubbing fastness test, and water repellency test. This product is available in a variety of textures

w******s

Before production, the electrode materials of Xprinter are carefully handled to prevent them from coming into contact with each other. Because contamination between the anode and cathode materials will ruin the battery. One advantage of this product is that it doesn't need to be sealed

t******y

All staff here exert the best effort to observe quality standards for this product. With light maintenance, it will last a lifetime

Product Message

*Name

Phone

*E-mail

*Content