Bar code printer basic maintenance steps _ printing equipment problems

here are the small make up to tell you the barcode printer basic maintenance steps. 1, the printhead cleaning

for the main and regular maintenance, will first cotton ( Cotton or cotton ball and so on have fewer crumbs and not rough cleaning tools) , with a small amount of alcohol, will play with one-way printhead plus hotline, wipe the printing head to be wiped by the number of times to touch the printhead carbon powder is wiped clean, after repeated confirmation to wipe twice ( About after print out a roll of paper, make a maintenance) 。

2, sensor cleaning

main purpose is to let the machine normal operation to the correct grab paper spacing and detect carbon with safety, etc. , if long time not for cleaning and maintenance, the sensor will deposit scattered in the dust in the air, long after the sensor light feeling coverage to a certain degree, the machine will have fault action produced, so please use air pressure bottle does not contain any ingredients, the amount of the spray mop to machine work environment to judge ( About a month, do a maintenance) 。

3, paper, carbon belt path and the cleaning and maintenance of each joint and lubrication

to install carbon paper and take the path of the dry cleaning, do to make paper and carbon belt will be able to operate more smoothly, in all can view on rotational joints or roll and clean attached in the above product, with every part of lubricating oil ( In about three months, to do a maintenance) 。

recycling of carbon belt shaft and shaft installation maintenance after each axis force needed to adjust, in order to prevent the crinkle happens, such as the customer is not recommended to do the cleaning and maintenance ( In about three months, do a bartender)