Bar code printer carbon with fracture solve the problem of _ printing devices

Don't know everyone in the use of bar code printer, have met with rupture of carbon, that generally for the following reason, now, let me be for you to come and tell you how to solve. 1. The bar code printer temperature setting is too high or too fast; 2. Carbon with poor quality; 3. Carbon is supply shaft or recovery of axial tension is too large; Began to rule out: 1. Lower the temperature and velocity, the phenomenon still; 2. Replacement of carbon belt, phenomenon remains. But find a strange situation. Every time is fast running out when broken carbon belt, a new volume not broken carbon belt; 3. From the above phenomenon is actually has a bottom, obviously this is caused by excessive axial tensile carbon with supply, customers themselves with a screwdriver to loosen a few; Reason 3: carbon belt not synchronize with labels to go forward, the print head only on carbon local heating ( With printed label become weak gradually to Bai Piao phenomenon) , leading to a partial melting of carbon belt by former carbon belt shaft snap. Solution: after carbon with axial tension before and after the adjustment, reduce carbon belt axial tension ( After the carbon with the top of the shaft adjustment nut counterclockwise) Before, increase the carbon with axial tension ( Before the carbon with the top of the shaft adjustment nut clockwise) 。 Also can increase the print head pressure (appropriately On both sides of the equilibrium pressure, pressure should not be too big) 。 Above is the reason why barcode printer carbon with fracture and solution, if you also want to know more information of barcode equipment and consumables to welcome you with WeChat, telephone, website and other ways to contact us, we will sincerely to answer your every question, make you satisfied.