Bar code printer to print patterns of what would happen after switching problem _ printing devices

Bar code printer print mode has two kinds: thermal transfer mode and thermal mode, the former is generally used to print coated with carbon belt, the latter is mainly thermal paper printing, does that change the printing material, we don't need to do any Settings? Answer: the printer driver print mode also needs to print mode. Most of the time, customers will always according to their own needs to replace with coated paper and carbon, but forgot a printer driver also need more change to the corresponding model, if they don't correspond to? 1. Typing errors, printer bright red light. 2. Carbon belt shaft will not automatically recycling the waste carbon finished belt. Solution: appear this kind of circumstance, it must be the barcode printers use original way of thermal printer, and then put on coated paper label and carbon belt, driven did not change as a way for thermal transfer printing mode, will lead to print the carbon belt shaft will not automatically recycling the waste carbon finished belt. At this time as long as in the bar code printer driver file, change the way to print by thermal to heat transfer mode, save parameter modification can solve the problem of bar code printer carbon with no recovery. Barcode printer malfunction, in many cases, not because the printer hardware problems, more often because of improper use, we should be before the use of the most basic principle of printing bar code printer and printer Settings, commonly used in this way can we really increase the work efficiency.